FEMI N250 DAXL Stationary Bandsaw - 230V

The FEMI N25 DAXL is a stationary workstyle style metal cutting bandsaw that runs on a 230V single phase input supply. This machine is made for use in industrial cutting applications such as structural steel, fabrication etc.. This machine is capable of a maximum cut capacity of 250MM. It is capable of mitred cuts, capacities are as follows:

Round pipe:

• 45 degree mitre up to 150MM
• 60 degree mitre up to 70MM

Square box section:

• 45 degree mitre up to 145MM x 145MM
• 60 degree mitre up to 70MM x 70MM

Rectangular box section:

• 45 degree mitre up to 135MM x 185MM
• 60 degree mitre up to 63MM x 107MM

It can make none mitred cuts on up to 240MM x 160MM rectangular box section, 225MM round pipe & 185MM x 185MM box section.

This machine boasts an automatic indepent down feed which means you do not need to pull the column down as you cut. This is a great advantage when repeated cuts are necessary.

Technical Specifications

• Blade length - 2480MM
• Motor power - 750W/1100W
• Input voltage - 230V
• Weight - 200KG
• Blade speed - 70 metres per minute
• Toothing - 6/10
• Lubrication required - Yes

Key Features

• Manual downfeed
• Arm, vice and swivel group in cast iron
• Vice with quick clamping device
• Side sliding blade guide with ball bearings
• Lubrication pump with aluminium body
• Adjustable left cutting angle from 0 to 60 degrees
• Quick stop devide at 45 and 60 degree position
• Large knob for easy blade tensioning