CP7 & CP47 Gas Equipment Checks

_{It is specified within the BCGA CP7 document, Gas cutting and welding equipment should be maintained under the Pressure Systems Safety Regulations, and as detailed in the Health and Safety at work act 1974 equipment should be “Suitable for use” “maintained” and “Inspected".}

_{Ensuring the safety of gas equipment in the workplace is a legal requirement. It's crucial for employers and those with a responsibility to understand and comply with these obligations. Welding Supplies Direct offers a convenient and cost-effective solution with our gas equipment inspections. Our CP7 (oxy-fuel), and the CP47 (single cylinder MIG/TIG) checks ensure that your company conforms to current regulations and is often a requisite from your insurance company.}

_{Making sure that the safety of gas equipment in the workplace is not just a good practice, but a legal requirement. It is of utmost importance for employers and individuals with responsibilities to fully comprehend and adhere to these obligations. At Welding Supplies your company's strict compliance with current regulations is often mandated by your insurance company. So, what does our comprehensive inspection encompass? Our qualified inspectors will make a visit to your premises. In approximately 35 minutes per set, they will conduct thorough examinations of your gas equipment. This encompasses visual and functional assessments of your regulators, flashback arrestors, hoses, and blowpipes, along with evaluations of your working area and storage facilities. Should any safety concerns arise, rest assured that our inspectors are equipped with a complete range of replacement parts to address them promptly.}

_{Upon the completion of the inspection, you will receive a Report of Thorough Examination. This document not only serves as written evidence that you are proactively meeting Health and Safety Executive (H&SE) requirements but also comes with a certificate of inspection. Additionally, our inspectors can provide valuable guidance on the proper handling, storage, and transportation of your gas cylinders and equipment.}

_{Your safety and compliance are our utmost priorities here at Welding Supplies Direct, and we are fully committed to assisting you in maintaining a safe workplace environment. Direct, we provide a convenient and cost-effective solution through our gas equipment inspections. Our CP7 (oxy-fuel) and CP47 (single cylinder MIG/TIG) checks are designed to ensure that you conform to all current regulations Book a CP7 and CP47 Gas equipment inspection here: https://www.weldingsuppliesdirect.co.uk/industrial-gas/cp7-cp47-gas-equipment-safety-inspections.html}

^{What is CP7?}

CP7 is the British Compressed Gas Association Code of Practice 7.

^{My Legal Requirement?}    

It is legally required that all gas equipment used in the workplace environment is in a safe condition. All apparatus has to be well maintained and regularly inspected.

As an employer or employee, it is essential that you understand your obligations. It is also necessary that you comply with them!

Our Trained BCGA CP7/CP47 Inspectors would thoroughly check your portable gas equipment. We would in all Cases supply a detailed report of the test. This gives you, written evidence that you are completely complying with the Health and Safety Executives requirements. A certificate is issued when the equipment complies with current BCGA CP7/CP47 regulations.

How can my company be compliant?

Our inspections are all conducted by Trained and qualified inspectors and include:

• A full equipment inspection to meet your legal requirements and industry code of practice

• An up-to-date risk assessment of your full working area

• A full report on equipment condition and a certificate of inspection

• A visual and functional check of Gas Regulators, Flashback Arrestors, Hoses and Torches

• Advice on the storage and handling of equipment and gas cylinders

Our Inspections will ensure that you comply with:

The BCGA (British Compressed Gases Association) Code of Practice 7 (CP7). The Safe Use of Oxygen/Fuel Gas Equipment (Mobile Cylinder Supply or Single Portable)

The Health and Safety at Work Act 1974 Section 2 

The Provision and Use of Work Equipment Regulations 1998: Statutory Instrument 1998 No. 2306:

Dangerous Substances & Explosive Atmosphere Regulations (DSEAR) 2002 (SI 2002 No.2776) The Acetylene Safety (England and Wales and Scotland) Regulations (15) 

The Pressure Systems Safety Regulations 2000: Statutory Instrument 2000 No. 128:

For further information please visit:  https://www.hse.gov.uk/ and the  https://bcga.co.uk/