Paton MFI 250 MultiPRO (15-4) MIG / DC TIG Welder - 230V

The PATON MFI MultiPRO (15-4) 250 is a 230V single phase industrial grade, true multi process welder. It is capable of MIG, DC TIG with high frequency and MMA welding to a very high standard. It also boasts a pulse feature on all three of TIG and MMA processes. That means welding materials such as stainless steel and aluminium (MIG only) is a breeze. It's 250 amp output allows for welding of up to 10MM thick mild steel whilst its very stable "low end" current allows for welding of very thin material. The Paton MFI MultiPRO 250 is capable of welding mild steel, stainless steel & aluminium (MIG only - when the right wire feed rollers & torch liner are fitted). It boasts a reverse polarity function, therefore it is capable of welding with flux cored & gasless welding wires. Overall, it is a great solution for industrial grade welding including structural steelwork, general fabrication and even thin fabrication work where the welds must be aesthetically pleasing.

The warranty on this machine is 3 years (managed by Welding Supplies Direct in the UK).

Key features include:

• Pulse capability on DC TIG and MMA processes
• High frequency start on DC TIG function
• Power source detachable from wire feed unit
• 15KG maximum wire reel capacity
• Wire inch function
• Gas test function
• Push button control panel
• Lockable settings
• Upslope and downslope control
• Pre gas and post gas control
• Inductance control

Technical specifications

• Input supply - 230V 32A
• Maximum output current - 250A
• Duty cycle - 70% @ 250A / 100% @ 208A
• Voltage range - 12V - 28V
• Wire feed speed range - 2M - 16M per minute
• MMA electrode capability - 1.6MM - 6MM
• Wire feeder - 4 roll
• Maximum wire feed reel capacity - 15KG
• Open circuit voltage - 12V (VRD) / 75V
• Required generator KVA - 11KVA (w/ AVR)
• Build standards: EN60205 - 1:2006 / EN60974 - 1:2012 / EN60974 - 10:2014
• Dimensions: 360MM x 260MM x 270MM
• Weight - ~11KG
• Protection class - IP21

You can find a link to Paton Ukraine's information page for this machine here.

The standard MFI MultiPRO 250 package includes a 3M MB25 MIG torch, gas regulator, 3M earth lead with clamp, 3M arc welding lead with Abicor Binzel electrode holder, gas hose with connections, 0.8MM - 1MM V groove wire feeder rollers, 1.2MM - 1.6MM V groove wire feed rollers and 0.8MM - 1.MM U groove wire feed rollers.  If you'd like to add a TIG torch for this machine please contact our sales team to discuss the exact configuration you would like.