Oxford Cutmaker 110 Plasma Cutter

Product Description

The Oxford Cutmaker 110 Plasma Cutter offers exceptional cutting performance on all metals. Designed with a tightly constricted arc, it minimizes kerf width while maximizing cut capacity and speed. This results in straight, clean cuts with minimal dross, even on thick materials up to 30 or 40mm. The performance difference compared to low-cost imported plasma cutters is striking. Additionally, cutting speeds are over five times faster than oxy-fuel (gas bottles), and operating costs are reduced by approximately 90%, with superior cut quality.

All hand torches come with drag cutting parts, making drag cutting the easiest and neatest option for hand plasma use. This design provides better access than other plasma torch designs and allows for easy following of straight edges or templates. A range of extended consumables is available for tight, tricky jobs. For cutting below 50A, tip contact cutting is possible, allowing for even more precision and visual access to the cutting point.

CUTMAKER models also excel in cutting the thinnest metals with absolute precision. Smaller models using the P75 torch work exceptionally well from 0.5mm upwards, and models fitted with the P130 can use optional ‘fine cut’ consumables for similar results. Mechanized cutting performance is outstanding; simply plug in our P75M or P130M machine torch, fit the CPC connector, and you are ready to use on cutting tables, straight line cutters, robots, etc. The CNC interface uses the same wiring as US-made machines, including start signal, OK-to-move contact, and adjustable divided arc volts, ensuring compatibility with all known cutting tables and THC systems.

Thermal Gouging

These models offer excellent gouging performance for small, light jobs to the heaviest plates. The arc stretch is unbeatable, providing smoother finishes and better control. They can remove welds, wear plates, create weld preps, and more. They are also suitable for automated gouging with robots or Gullco carriages and tractors. To gouge, simply replace the tip and shield with gouge parts and reduce air pressure by around 1 bar.

Metal Marking

Our metal marking function allows fast, clean marking of metals for both automated and manual use. You can mark drill points, fold marks, add your logo, date code, ID, etc. Unlike competitors’ products, we use standard cut consumables, allowing you to switch from cutting to marking in seconds.

Thermal Heating

This feature provides a fast source of direct heat for manual use, primarily for removing seized nuts, bearings, and light preheating jobs. It offers 1.8kW / 2.7kW of intense, instant heat, much hotter than propane or butane torches. The heat is more direct and controllable, heating only the item you need while the torch cooling air keeps everything else at a low temperature. For example, when removing seized nuts, propane torches tend to heat both the nut and bolt, but Cutmaker plasmas can heat the nut while keeping the bolt relatively cool, allowing quicker removal.

Typical times to heat nuts to cherry red are:

• M5: 3 seconds
• M6: 5 seconds
• M8: 8 seconds
• M10: 14 seconds
• M12: 20 seconds

Additionally, the thermal heating function can be used to bend plastic parts or for plastic welding. Thermal heating can be performed with cutting consumables for a tight heat focus or gouging parts for a softer, wider arc.